We offer a range of automatic manually submersible starter and industrial starter Agricultural Electrical Products, the brand is ReEdar industries that has served farmers for over 50 years. Agricultural Electrical Products include electrical starting solutions, submersible pumps, and domestic pumps.
The offerings also include starters, controllers for 1-phase and 3-phase submersible pumps. for Starters & Controllers is a high technology product for operating pumps through from a remote & push button control.

Capacitor Control Panel

ReEdar


offer highly customized & effective capacitor control panels. Our capacitor

control panel is widely used in various industrial units. Our panel came with a

power circuit consisting of contractor, MCB and fuses.

Product Information

We selected the field of energy conservation or energy saving, witch is a need

of the time and is receiving attention from the governments and from private

sectors as well. Out of various various electrical fields this area is one part ,

is a subject of our expertise and experience.

Power factor is the ratio between true power and apparent power,Thus, P.F. = KWH / KVAH. Here, KWH is an abbreviation for Kilo Watt Hour or Unit.KVAH is an abbreviation of Kilo Volt Ampere Hour.

This ratio is normally a fraction figure but ideally should be 1.0 (Unity) or as close to unity as possible. This ratio is called power factor. Any value of power factor near to unity is called good P.F. and similarly below 0.92 is assumed as poor power factor.

Power Factor – The power factor of any power consuming centre depends upon three types of loads being used in present day industries. To explain, normally there are three kinds of loads present in any industry, individually or in combination.

Resistive load: Under this condition the P.F. is always 1.0, i.e. unity. This is an ideal situation. This is achieved with loads like resistive heaters, filament lamps etc.

Motor Control Panel

Reedar offer a wide range of motor control panels. These are widely used to feed the larger loads and are available with power stabs. The main task of motor panel is to support high capacity industrial motors. Customization is our forte and all our products are offered as per the specification requirement of our client.

Power Control Center

ReEdar offer a wide range of power control centers to our clients. These are used in various sectors like industrial, commercial, heavy industries. Some of the features of our products are.Weather proof

Integrated main switch fuse unit

Contractors (Magnetic)

Control circuit transformer

High temperature controllers

Voltmeter

Direct Online Starter Panel

We have carved a niche in the industry as the Manufacturer, Exporter and Supplier of Direct Online Starter Panel from Gaya Bihar, India. Our skilled experts keep an eye on the production of the Starter Panel and conform to the latest industrial trends. To ensure customer satisfaction, we check the Panel on stringent quality parameters before the final delivery. We are offering Direct Online Starter Panel at minimum rates.

Specifications:

Fully Automatic DOL Starter is Manufactured MS sheet steel with floor / wall mounted.The entire range is made of top quality raw materials and is available at very economical prices.DOL starters Combined with Air Break Contactor, Voltmeter & Ammeter with Selector switch, overload Relay.Single phase  preventer, Phase failure with under / over voltage protection.On/Off Indication Lamp with Control MCB/Fuse, Start/Stop Push button, On delay Timer & Current Transformer.etc.

Variable Frequency Drive Panel

We are counted amongst the credible Manufacturers, Exporters and Suppliers of Variable Frequency Drive Panel from gaya Bihar, India. The Frequency Drive Panel we offer is appreciated for its precise design, dependable operation, durable buttons and cost-effectiveness. We package the Drive Panel in tamperproof materials to ensure customers receive a defect-free product. Customers can count on us for timely delivering any order of Variable Frequency Drive Panel across the globe.

Specifications :

Variable frequency drive panel are manufactured with Incoming ACB/MCCB/Switch fuse unit of suitable rating with all required materials, i.e. Display unit, Provision for remote Start/Stop, Ammeter, Voltmeter with CT & Selector Switches, Indication Lamp & Push Button.

These Drives can also be interfaced with PLC’s system.

Oil Immersed Automatic Transformer Starter

,Manufacturers Oil Immersed Automatic Transformer Starter,Exporters Oil Immersed Automatic Transformer Starter,Oil Immersed Automatic Transformer Starter India,Suppliers Oil Immersed Automatic Transformer Starter ReEdar inadia control panel board – Oil Immersed Automatic Transformer Starter

Oil Immersed Automatic Transformer Starter

Oil Immersed Automatic Transformer Starter

Our range of hand operated oil immersed auto transformer starters is compact, totally enclosed with gasketted joints. The entire range is made of top-quality raw material and is available at very economical prices. The team of professionals ensure that the starters are well finished and perform smoothly.

Our range includes:

Fully automatic auto transformer starters upto 600 HP 550V (275 HP Type Tested from ISO

Manual auto transformer starters upto 200 HP 550V

Any other voltage can be supplied on request.

Features:

Case and lid are of MS sheet thus suitable for use in places demanding a robust apparatus.

In case thermal overload rely is required it can be supplied on request.

Adjustable magnetic type overload protection with oil dash-pot type time lag device provides insurance against motor burnout.

Are designed for ordinary duty

Standard trappings’ are provided at 50%, 60% and 80% of the line voltage

Correct sequence device rendering it impossible to put the handle into the “Running” position without going through the “Start” position.

Tripping by push button fitted on the unit.

Remote stopping is possible by push button station or any other tripping device�for which the no-volt terminals are brought out.

Provision for fitting an isolator � interlocked with the unit�so that opening of the unit is not possible till the isolator is made “Off”.

Padlocking arrangement for isolator.

Cable sealing boxes can be supplied for under-

Ground paper insulated cables hence suitable for PVC cable entry.

Can be mounted on unit type bus bar chambers to form a switchboard.india

AT 50 units can be wall-mounting as well as floor-mounting types. AX-45 is floor-mounting type only.

The unit has the provision for fitting one instrument directly on itself. For more than one unit, an instrument panel is provided.

Floor stand can be supplied as an optional item.

Soft Starters

Soft Starters,Manufacturers Soft Starters,Soft Starters India,Expourters Soft Starters

ReEdar india control panel board Manufacturing all type

Soft Starters,Manufacturers Soft Starters,Exporters Soft Starters,Soft Starters India,Suppliers Soft Starters

ReEdar india – Soft Starters

Soft Starters

Our range of soft starters is a general purpose AC motor soft starter industrial package. It provides a complete and effective AC motor starting and protection solution with it’s GPH starters built for ruggedness and reliability. These are designed for simple and fast installation and start-up, requiring only input power and output motor connections. The use of superior quality raw material makes the entire range more desirable.

Applications:

Pumps. Fans / Blowers. Conveyors. Compressors. Agitators. Crushers. Saws

Features:

5 – 150HP at 230V and 10 – 300HP at 460V

Wall mount enclosure suitable for dusty, wet or outdoor applications

Circuit breaker with door mounted operator provides built-in short circuit protection and input power disconnect

Automatic bypass contactor

Fused Control Power Transformer (CPT)

Start and Stop Pushbuttons and Run and Fault Pilot Lights on the front cover

Terminals for 2 or 3 wire remote Start/Stop

Keypad with protective cover mounted on enclosure door

All parameter changes are through the cover-mounted keypad.

Dust and water stay out of the enclosure.

Monitoring of current, voltage, kVA and kW can be done from the outside.

AC3 rated bypass contactor and motor overload relay is standard on 5 – 30HP / 230V and 10 – 75HP / 460V

Optional Features:

Keypad mounted inside enclosure. No circuit breaker.Legs for free standing enclosure. AC3 rated bypass contactor with motor overload relay. 575V units are available.

Rotor Starters

Stator Rotor Starters, Manufacturers Stator Rotor Starters, Stator Rotor Starters India, Exporters Stator Rotor Starters

ReEdar india

Stator Rotor Starters, Manufacturers Stator Rotor Starters, Exporters Stator Rotor Starters, Stator Rotor Starters India, Suppliers Stator Rotor Starters ReEdar india – Stator Rotor Starters

Stator Rotor Starters

We manufacture Oil Immersed Stator-Rotor Starters that are designed for use on Voltages up to 550 Volts. H.P. 330 HP. These starters comprise of separate Stator Controlling OCB and Rotor Controller mounted on the same base frame made of galvanized steel making it durable and efficient in working. We offer these at very affordable prices.

Operating Mechanis

ReEdar india :

Is interlocked with Rotor Controller and the OCB cannot be switched ON until and unless the full external resistances are inserted in the circuit

The Rotor Controller and OCB are connected strictly as per the circuit diagram

The OCB is closed by putting the handle to “ON” position

The push button provided with the Rotor Controllers is kept pressed till the resistance cutting “wheel” of the Rotor Controller is rotated to full “ON” position.

Contacts:

The Stator Controlling OCB’s are provided with heavy type copper contacts to ensure a trouble free life

The contacts are made from hard drawn electrolytic copper strips

Each unit is provided with two sets of contacts : arcing contact and main contact

The arcing contacts make before and break after the main contacts, thus confining burning to the arcing contacts

The main contact scarcely calls for replacement where as the arcing contact can be replaced very easily

Protection:

Overload Protection – is of magnetic type with oil dash pot time lag arrangement in all three phases.

Under Voltage Protection – is provided by a closing type solenoid coil.

Accessories:

Are generally provided with incoming and outgoing cable entry plates

Cable boxes for paper insulated cables, fully interlocked isolator and ammeter can also be provided, on request

Rotor Controller:

Is designed to comply with latest IS for use in Rotor Circuit of A.C. Slipring Motor

Adequately rated resistance wires are selected as per the current at various steps and are robust in design

The Rotor resistance is based on the Rotor Volts and Rotor Amps of the Motor

The cutting off resistances are achieved by the rotation of CAM operated “wheel” and this provides smooth starting of the motor.

Special Features:

Foolproof interlocks are provided in the Starter as per the following:

The Motor can be started only when full Rotor resistance is in the Rotor Circuit. Otherwise the Stator controlling OCB will not close.

The motor cannot be left running with rotor resistance in the circuit. If by any chance the rotor resistance is left in the circuit the starter will trip no sooner the push button on the rotor controller is released.

Automatic Air Brake Star Delta Starters, Manufacturers Automatic Air Brake Star Delta Starters, Exporters Automatic Air Brake Star Delta Starters, Automatic Air Brake Star Delta Starters India, Suppliers Automatic Air Brake Star Delta Starters

ReEdar india – Automatic Air Brake Star Delta Starters

Automatic Air Brake Star Delta Starters

Automatic Air Brake Star Delta Starters

We supply our top quality automatic air break star delta starters type CSD/A for starting of squirrel cage induction motors. These comply to  775 and  587 and are suitable for 40 starts per hour. The product is offered at reasonable prices.

Construction:

Totally enclosed, in a deep-drawn sheet metal casing, wall mounting type, suitably gasketted to make it dust proof

The entire starter assembly (which is mounted on a steel plate) can be taken out of the casing by removing four screws only.

Maintenance is facilitated by taking the interior out for repair while a spare interior can be inserted.

Rating:

The automatic star delta starters are ideal for controlling motors up to 7.5 to 40 HP at 400/440 volts or 500/550 volts

Adjustable Timer is incorporated for automatic changeover from Star to Delta.

Protection:

Are provided with magnetic type overload releases with an adjustable oil dashpot time lag device on all the three phases

The magnetic overload device, which works on the magnetic principle of current, is totally independent of the ambient temperature, provides a positive and direct protection to the motor

Non-aging properties inherent to the magnetic overload device ensures the same protection to the motor even after years of service

Can also be fitted with thermal type bi-metallic overload releases with temperature compensation devices

The overload device is of the Hand-Resetting type which is an essential feature where remote control is required.

The under voltage protection is inherent

Control:

Start and Stop/Reset Push Buttons are provided on the front cover

Remote control terminals are also provided for remote operation by means of limit switch, float switch, pressure switch or a separate push button unit.

Isolator:

A rotary type triple pole air break isolating switch can be provided on starters, the operation of which is interlocked with the lid of the starter

Ensures that the start er lid cannot be opened till the isolator is in the OFF position.

Cable arrangements:

Units are provided with entries for conduit connections

Sealing boxes can be provided for underground paper-insulated cables.

Earthling:

Double earthling terminals are provided.

Timer:

Special current activated change-over Timer ensures transition from Star to Delta at approximately the rated current of the motor only, irrespective of the transition time which depends on the drive

This leads to no wear on the contacts due to transition kicks.

Stator Rotor Starter, Manufacturers Stator Rotor Starter, Stator Rotor Starter India, Exporters Stator Rotor Starter

ReEdar  India:

Stator Rotor Starter, Manufacturers Stator Rotor Starter, Exporters Stator Rotor Starter, Stator Rotor Starter India, Suppliers Stator Rotor Starter

ReEdar India – Stator Rotor Starter

Stator Rotor Starter

Stator Rotor Starter

We supply fully automatic combined stator and rotor starters type PRS that comprise of an air break contactor with over current and under voltage protection for the stator and set of accelerating contactor along with automatic timing devices. These enable the motor to run up-to the speed in a pre-determined time. These are manufactured to conform to IS: 13947 Part-1 section 4 quality standards and are normally suitable for 15 operations per hour.

Contractor. Air break contractor confirming AC III. Timers. Electronic timers to adjust no of steps and time delays.Overload Relay.Can be provided with either electro-magnetic oil dash pot time lag over current release or bimetallic type thermal relays. Give the necessary inverse time characteristics for protecting the connected equipment

Resistance unit:-

Can be either of nichrome round or fiat strip or cast stainless steel grids

Stainless steel grids are given for units above 100 HP

Wire wound resistances are supplied from lower HP

Controls:

Start, Stop and Reset push buttons, are provided on the front cover

Terminals are also provided for remote operation by outside signals.

Isolator:

Can be fitted quick make and quick break isolators

Its operation can be interlocked with the front cover.

Instruments and Cable Arrangements:

Provision is made for mounting metering instruments

Blank gland plates are provided for fixing cable glands

Rating:

Standard ratings are up 7.5 to 40 HP� to 400 HP at 415V and 2000 HP at 6.6KV

Specific details regarding rotor volts and rotor currents should be supplied with the inquiries.

Oil Immersed Star Delta Starter

Oil Immersed Star Delta Starter, Manufacturers Oil Immersed Star Delta Starter, Oil Immersed Star Delta Starter India, Exporters Oil Immersed Star Delta Starter

ReEdar India

Oil Immersed Star Delta Starter, Manufacturers Oil Immersed Star Delta Starter, Exporters Oil Immersed Star Delta Starter, Oil Immersed Star Delta Starter India, Suppliers Oil Immersed Star Delta Starter

ReEdar india – Oil Immersed Star Delta Starter. Oil Immersed Star Delta Starter

star delta starters

ReEdar offer star delta starters and circuit breakers type GRD-50/GRD-200 that are designed for use on Voltages up to 550V. The starters and breakers are designed in both standardized as well as per client’s specifications. The use of high-grade raw material further ensures world- class products.

Rating:

Star-del ta  � 225 H.P.

Direct-on-line � 150 H.P. on request

Circuit Breaker  � 400 amps.

Construction:

Main body and the oil tank of sheet metal

Enclosure is both moisture and dust proof

Operating Mechanic reedar india

Have a standard ‘fixed’ handle but can be provided with free handle as well

Free handle is a standard feature with circuit breakers.

Contacts:

Are provided with heavy type copper contacts made from hard drawn electrolytic copper sections to provide trouble free life

Protection:

Overload protection – is of magnetic direct acting type with adjustable oil dashpot time lag arrangement

Provides positive  protection against single phasing being connected in phase circuit.

Under voltage protection- is provided by a closing type solenoid coil.

Accessories:

Are provided with incoming and outgoing cable entry plates

Cable boxes for paper insulated cables, fully interlocked isolator, ammeter, voltmeters, earth leakage relay, bus bars, single phasing preventer, remote stop provision, floor stands, etc., can also be provided on request

Starter & OCB are supplied without 1st Filling of oil.

Automatic Transformer Starter

Fully Automatic Air Brake Automatic Transformer Starter,Manufacturers Fully Automatic Air Brake Automatic Transformer Starter,Exporters Fully Automatic Air Brake Automatic Transformer Starter,Fully Automatic Air Brake Automatic Transformer Starter India,Suppliers Fully Automatic Air Brake Automatic Transformer Starter

ReEdar india – Fully Automatic Air Brake Automatic Transformer Starter

Fully Automatic Air Brake Automatic Transformer Starter

Fully Automatic Air Brake Automatic Transformer Starter

We are a trusted Manufacturer, Exporter and Supplier of Automatic Transformer Starter. Hence, we have developed a strong distribution network to deliver Automatic Transformer Starter in domestic and international markets.

Specification :

Fully Automatic Auto Transformer Starters Combined with air Break Contactor (Main / Transformer / Star), Motor Protection device having cyclic Ammeter,

Under Current / Over Current Protection, Single Phase Protection & Inherent Dry Run Protection, (MPD)

Voltage Protection Device having voltmeter, Under voltage / Over voltage, Single Phase / Phase Reversal / Phase Unbalance Protection (VPD),

On/Off/Trip Indication Lamp with control MCB/Fuse, Start / Stop Push button, on delay Timer

Current Transformer & Air/Oil Cooled auto Transformer with 50%, 65% & 80% Tapping’s Suitable for 4-6 Start per Hrs., with the time gap of 10-15 Minutes per start in Hot condition & 2 Consecutive start in cold condition without First Filling of oil

Liquid Rotor Starter

Liquid Rotor Starter,Manufacturers Liquid Rotor Starter,Exporters Liquid Rotor Starter,Liquid Rotor Starter India,Suppliers Liquid Rotor Starter

ReEdar india – Liquid Rotor Starter

Liquid Rotor Starter

Liquid Rotor Starter

We manufacture Liquid Rotor Starter. Our Liquid Rotor Starter is fabricated by using high grade components in adherence to the norms set by industrial regulatory bodies. Customers can get in touch with us for acquiring Liquid Rotor Starter in bulk at reasonable rates.

Specifications;

The liquid Rotor Starter is manufactured confirming to Rajnish kumar villa – 140 version of Automatic Motor Operated & Manually Operated. The starter Electrolyte tank is made out of 3mm Thick MS sheet steel and other fabrication is of 2mm MS sheet steel. Epoxy Black Paint (for anti-Corrosion) is done inside the Electrolyte tank. Polypropylene phase barriers are provided. Movement of Moving electrodes are horizontal / vertical type as per requirement. The starter is suitable for two consecutive starts from cold & four starts per hour equally spread in hot conditions. Limit switches for interlocking purpose with spares contacts are provided in automatic version. Electrolyte filling & over flow sockets will be provided. Air break Power contactor of suitable rating is provided to suit RA of motors for final short Circuiting to the resistance.

For Automatic Version Integral Control box (housed will main MS tank of LRS) of Suitable size will be provided. It will be having RDOL Starter of suitable rating aux. Contactor for reversing & forwarding Pilot motor & the moving electrodes, over load relay, key actuated auto/Manual Selector switch, push button, Isolating Switch, Indicating lamps and Power / Control TBs etc.

All The motor 7 Switchgear Components used are of reputed quality. The starter is interfaced with consignee’s PLC system also. The electrical interlocking circuit will be provided for consignee’s PLC systems. The interlocking is such that the main motor cannot be started unless resistance is in fully “In” Position & the main motor will be tripped, if the Electrodes does not reaches to run position within Specified time. Electrolyte level indicator & temperature sensor with alarm & trip contacts can be provided on request.

Frequency Drives

We have firmly positioned ourselves as one of the major Variable Frequency Drives Manufacturers and Suppliers based in India.

Variables Frequency Drives

We offer a range of variable frequency drives that are available in 6 control modes and are offered at competitive prices. These drives accomplish part load control by varying electric motor speed, significantly reducing energy waste.

Variables Frequency Drives

Variables Frequency Drives,Manufacturers Variables Frequency Drives,Exporters Variables Frequency Drives,Variables Frequency Drives India,Suppliers Variables Frequency Drives

ReEdar india – Variables Frequency Drives

Variables Frequency Drives

Variables Frequency Drives

We offer a range of variable frequency drives that are available in 6 control modes and are offered at competitive prices. These drives accomplish part load control by varying electric motor speed, significantly reducing energy waste.

Features:

Available in 6 Control Modes:

V/f variable torque control

V/f constant torque control

Sensor less vector control

Closed-loop vector control

Sensor less PM motor control

Closed-loop PM motor control

Are Environment-friendly:

Optional built-in EMC filter (up to 30kW at 400V series, 5.5kW at 200V series.)

Optional built-in DC reactor (37kW at 400V series, 22kW at 200V series,and above)

RoHS Directive compliant

Selectable Soft-sounds

High-efficiency operation

Dioxin-free plastic cases

Available in Global Design:

UL, CUL and CE compliant

Field bus interfaces (Modbus, Profibus-DP, DeviceNet, CANopen, CCJJnk)

LED display as standard

Multi-language LCD monitor as option

Other Features:

User-programmable built-in PLC

Application-specific features

Multi-pump control

PID control

Traverse control for fibre machines

Spinning ring frame

Energy optimizer

Elevator program

Feeder Pillars

Feeder Pillars,Manufacturers Feeder Pillars,Exporters Feeder Pillars,Feeder Pillars India,Suppliers Feeder Pillars

ReEdar India – Feeder Pillars

Feeder Pillars

Feeder Pillars

We are engaged in manufacturing of feeder pillars that have a specified standard of protection IP:55. These pillars are perfect for outdoor use and are widely applicable in different non-industry and industrial applications. These are manufactured using superior quality material and sub equipment. These pillars are perfect for outdoor use and are widely applicable in different non-industry and industrial applications.

Power Distribution Panel

Power Distribution Panel,Manufacturers Power Distribution Panel,Exporters Power Distribution Panel,Power Distribution Panel India,Suppliers Power Distribution Panel

ReEdar India – Power Distribution Panel

Power Distribution Panel

Power Distribution Panel

We offer a wide range of power distribution panels. These are used to distribute direct current power from one supply to other devices. The main task of power distribution panel is to monitor and protect DC Systems. Our power distribution panels are used as:

Shorted output device

Heater current indication

About industry’s ( Manu liste )

Submersible starter

Shoft starter

Automatic transformer starter

Control panel/ LT panel

Oil immersed starter

Capiciter panel

Feeder Pilar

Star delta starter

Double starter

PLC panel

Changeover panel

Automatic phase changeover

MF / panel

Distribution Board

Full technology / industrial product